Installation method of stainless steel sintered filter element

Installation method of stainless steel sintered filter element

Xinxiang Oudexin Filter Co., Ltd.           Date:2019-11-29 09:22:05

 

Installation method of stainless steel sintered filter element:

shaojie.jpg
 
1. When installing the plug-in filter element, we should first wet the O-ring in the clean parallel filtrate to reduce the friction when inserting it. It is required to be inserted to the end, and two O-rings are used for sealing.
2. When installing the snap-in filter element, it needs to be rotated and positioned clockwise.
3. If the filter has a pressure plate, press the pressure plate on the rocker, and gently press the spring on the pressure plate. If the spring is too tight, the filter element will not distort and will cause distortion and affect the filtration accuracy.
4. When filtering the liquid, you should first open the exhaust switch on the housing, and evacuate the gas in the filter cartridge, so that the liquid fills the filter cartridge, otherwise it will affect the flow.
5. The fluid filter will generate pressure drop due to resistance. In order to overcome the resistance, there must be sufficient working pressure. In order to prevent the filter element from being impacted by large flow, the valve should be opened slowly.

Pre:Cleaning method of stainless steel sintered filter element

Next:Stainless steel security filter precision filter works

Leave message

Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.

Product Catalog